Company Profile | Request more information
Kussmaul Electronics Company Inc.
Company Profile | Request More Information
Manufactures a complete line of automatic battery chargers for emergency vehicles. The auto charge fully automatic chargers are available in sizes from 1 to 75 amps. Automatic disconnects, the auto eject for electrical lines and the air eject for air line.
Want to know more about Kussmaul Electronics Company Inc. Request more information
Expand for more details on this Company
The new Power Timer, Model TMR-30KE P/N 390-0030-5, from Kussmaul Electronics, eliminates dead batteries caused by power drain from radios and data terminals that operate while the engine is off. The unit allows the use of accessory loads per programmed time limit while preserving the battery for starting the engine.
The new Kussmaul Auto Charge 7 LPC 445-4290-5 is a 7 amp battery charger with a selector switch for two charging modes—float only or 3-step charging. The charger is lightweight and has a low profile. The clean output poses no interference with radios and other mobile devices. The lead acid gel cell switch selects optimum charge/float voltages on battery type. This charger’s current limiting prevents damage from overload while the load activated cooling fan allows continuous operation at full-rated output. A heavy duty stainless steel case meets the rigors of emergency vehicle use.
The new BATTERY SAVER LOW RIPPLE HO, Model 091-195-12, introduced by Kussmaul Electronics is a 20 amp, LOW RIPPLE power supply with a load transfer relay. The relay automatically switches the load from the battery to the power supply when the A.C. line is applied. This unit is ideal for powering a computer or MDT, it provides a low ripple regulated output and an anti-glitch feature, which protects from losing power and causing a computer or sensitive electronics to reboot.
Deluxe Auto Charge Status Center
Product From Kussmaul Electronics Company Inc.The Deluxe Auto Charge Status Center, 091-194-IND-WT, from Kussmaul Electronics is a rugged watertight digital display remotely mounted that gives you an accurate reading of the condition of your battery. Acting as a diagnostic tool, it can be made to match your Auto Eject with a watertight bezel that comes in five colors: red, white, black, gray and yellow. It has a five-segment bar graph display that indicates output current and four LEDs to show the condition of the battery. The Hi and Low Battery Condition LEDs blink to indicate there may be a problem with the vehicles electrical system. The unit is compatible with the Auto Charge 40 LPC, Auto Charge 1200, Auto Charge 1200 Remote, and Auto Charge Pump Plus 1200.
