ICE (Interchangeable Cooling Environment)

ICE (Interchangeable Cooling Environment)

ICE (Interchangeable Cooling Environment) Product Image

EMS Innovations has developed a portable system for use in non-invasive rapid therapeutic cooling and preservation cooling. The ICE

More text exists for this Product and can be expanded

EZ Glide with PowerTraxx

Product From Ferno

The EZ Glide with PowerTraxx from Ferno powers patient loads up to 500 pounds up and down stairs without carrying or lifting. The motor and track system carry the weight, reducing fatigue and the chance for injury. The optional folding head rest doubles as a back rest and can be used as a solid base to start chest compressions for CPR. Visit www.fernoems.com/powertraxx.

Flex.Pad

Product From EMCOOLS Medical Cooling Systems AG

EMCOOLS Flex.Pad is a non-invasive surface cooling system designed for therapeutic hypothermia treatment in the prehospital and in-hospital setting.

The innovative HypoCarbon®-technology guarantees highly efficient cooling rates.The cooling pads are non invasive and take only two minutes to apply to the patient's body. The cooling system requires no external power supply during the cooling process. Hence, the EMCOOLS cooling technology allows for the cooling therapy to be started immediately after ROSC and followed through to intensive care.

M1635FR Fire Resistant Vest

Product From Cool Medics

This vest has all the qualities of our basic Cool Medics Vest, as well as being flame resistant. Unlike other flame resistant fabrics with limited flame retardant expectancy, this flame resistency will not wear off with washing. Our Cool Medics fire resistant products are manufactured from 100% 7-ounce flame resistant fabric that is guaranteed for the life of the garment. This fabric has met federal test method 191 and standard test method 5903, and meets NFPA70E Category 2.

Turley Backboard Pad

Product From Turley Backboard Pad Co.

The Turley Backboard Pad was created by veteran field paramedic Amy Turley out of compassion and need. It is a reusable, multi-purpose, multi-use gel pad that can be heated and cooled according to the patient's need. Use cold for induced theraputic hypothermia, heat stroke, splinting, cardiac and spinal injury patients. Use heated for patient comfort, hypothermia, to prevent heat loss and prevent the Trauma Triad of Death. The Turley Backboard Pad fits on any backboard or immobilization device. Decon after each use, and use again and again for years.

IVECS - I.V. Evaporative Cooling System

Product From PerSys Medical

The I.V. Evaporative cooling system (IVECS)™ was developed by Tactical Medical Solutions to prevent I.V. fluids from reaching excessively hot and potentially dangerous temperatures. Studies have shown that excessively hot I.V. fluids can cause tissue damage and hemolysis. Hot fluids are also counterproductive when treating heat casualties. When operating in a desert or any low humidity, hot environment, this becomes a very serious concern. Recent tests have shown that the IVECS can maintain fluids at safe temperatures for up to 18 hours in extreme heat without any additional cooling assistance or power supply. The IVECS provides a cost effective, reusable and simple means of increasing the quality of patient care in a prehospital or combat environment.

IV Warmer Bag

Product From Check Corporation

First responders no longer have to worry about pumping room temperature liquids into trauma victims. Using the very same resistive wire technology as in the blanket warmer, Check HealthCare developed an IV warmer bag at the request of many customers.

ULTROX Medical Grade Oxygen Cylinder Filling Systems

Product From AirSep Corporation - Commercial Products Div.

Emergency medical services, disaster management agencies, hospitals, clinics and military forces benefit from the reliability and cost effectiveness of Airsep's ULTROX Medical Grade Oxygen Cylinder Filling Systems.

MondoVap 2400 Steam Cleaning System

Product From Advanced Vapor Technologies

The Complete MondoVap 2400 Institutional System includes:

  • Extended length flexible hose assembly
  • Non-rust utility service cart
  • Portable tool tote
  • Supply bag (attaches to cart)
  • 25-foot heavy-duty extension cord

Power-LOAD Cot Fastener System

Product From Stryker EMS

Power-LOAD helps reduce injuries when loading and unloading. The Power-LOAD cot fastener system from Stryker EMS improves operator and patient safety by supporting the cot and patient throughout the loading and unloading process. By reducing spinal loads on operators, cumulative trauma injuries can be reduced. Power-LOAD wirelessly communicates with Power-PRO cots for maximum convenience and efficiency. Visit

EMCOOLS PRODUCTS

Product From EMCOOLS Medical Cooling Systems AG

EMCOOLS Flex.Pad

EMCOOLS Box & EMCOOLS Boxholder

EMCOOLS Keep

EMCOOLS Six.Pack